Please click on picture to open it in separate window
The roof fan of the Antec P180 Mini is 200mm x 25mm and also Tricool. Like the 120mm preinstalled fan – also the roof fan has speed adjustment switch located in the rear panel of the case.
Please click on picture to open it in separate window
Antec P180 Mini has space for five hard disks. There are two caddies and the other supports three 3.5″ hard disks while the other supports two 2.5/3.5″ disks. All hard disks have rubber feet vibration absorb system and are connected with screws to the caddies. Both HDD trails in the picture are in the position they would be inside the case. As you can see, two of the disks will be in horizontal direction while three will be in vertical.
Please click on picture to open it in separate window
HDD rails in the second HDD caddy look like typical Antec rails. It has places for both 2.5″ and 3.5″ disks (both are identical) and all therubber feet are preinstalled in 3.5″ places. If you need to install SSD / 2.5″ HDD, you need to remove all the four rubber feets and install them to corresponding places.
Please click on picture to open it in separate window
Last, but not least, we will look at the accessories provided. There are three sets of 5.25″ slot rails, 5.25″ to 3.5″ adapter and frontplate for it alongside with a bag of screwes. The provided screw-baggy has motherboard screws, power supply screws, motherboard risers, couple spare rubber feets for HDD caddies and enough screws for both 2.5″ and 3.5″ hard disk installations.
